Assembly Instructions

Discover Raised Garden Bed

Just 2 steps. All you need is a Robertson or Phillips screwdriver.

Select your bed height

Hardware Included

for DISCOVER 8″H / 12″H

Flange Nuts
8x
Flange Nuts
Bolts
8x
Bolts
Sealing Washers
16x
Sealing Washers

CAUTION — Sharp edges — Please ensure safety lip is at the top — Gloves recommended

1

Lay Out the Two Pieces

Place both pieces on a flat surface with the integrated safety lip facing up.

Step 1: Lay out the two pieces
2

Connect & Tighten

Bring the two pieces together and insert hardware through each bolt hole. Hand-tighten all bolts first, then go back and fully tighten each one evenly.

Step 2: Connect and tighten
Detail: hardware order from outside to inside

From the outside in: bolt → sealing washer → garden bed → sealing washer → flange nut. Make sure the neoprene (black side) of each washer faces toward the garden bed.

Accessibility Tip

A pair of pliers can be helpful for holding nuts in place while tightening.